Water Record Residential water, on the record.

Why does my well water stain everything orange?

Rust-colored staining on tubs, toilets, sinks and laundry is the classic sign of iron in well water; black-brown staining points to manganese instead. The stain color is the first diagnostic.

Likely causes

CauseHow commonWhat distinguishes itAesthetic threshold (EPA secondary, public systems)
Iron common Reddish-orange staining, rusty color, sediment or metallic taste — the effects EPA lists above its 0.3 mg/L secondary standard. 0.3 mg/L
Manganese occasional Black-to-brown staining and a bitter metallic taste rather than orange — the effects EPA lists above its 0.05 mg/L secondary standard. 0.05 mg/L

EPA secondary standards are non-enforceable aesthetic guidelines for public water systems — private wells are not regulated against them, but they mark where effects appear.

Confirm it

Read the stain before you buy anything.

Orange-red rings in the toilet tank and tub, rusty streaks in laundry, or water that runs clear and stains later — that pattern is iron. Black or dark-brown crust on aerators and in the dishwasher, with a bitter metallic edge to the taste, points to manganese. The two usually occur together in groundwater, which is why a proper test measures both.

Confirmation costs far less than the wrong filter. A state-certified lab test for iron and manganese — dissolved and total — tells you the concentration and the form, and the form decides the treatment. Water that arrives clear needs oxidation before filtration; water that arrives tinted carries particles a filter can catch directly.

Once the numbers are in hand, the iron treatment guide walks through matching a system to the concentration and form.

Stain color is the fastest sorter on this site: orange-red and black-brown belong here, chalky white buildup is hardness, blue-green is copper corrosion — a different mechanism with an opposite fix — and tea-yellow water with no particles at all is the tannins diagnosis.